Sunday, October 23, 2011
DIY Ring Wall Holder
Okay this project started out as a complete mistake! As you can tell from my previous post it is the same structure for my Nail Polish Rack, except the shelves on this one were too short and none of my polishes fit. After working so hard on it I didn't want to throw it out. Then one day It dawned on me that I could turn it into a ring holder! I used all the same items that I used to make my Nail Polish rack and only added the foam rolls. These are repurposed from the dollar store, they are Hair curlers. I just simply took out the Plastic pieces. I used the LOW HEAT (Very important- I learned this the hard way) setting on my hot glue gun to attach the foam to the board itself. The "Jumbo" size fit best. I wanted to do the whole thing with pink foam rollers but they didn't have enough so I had a Tim Gunn "Make it work" moment by adding the black.
The above picture is the close up of the foam rolls and some rings. The popsicle sticks are glued onto each shelve to make it easier to attach the trimming. I have TONS of rings, right? I love tchotchke things, and these rings fill my obsession with obnoxiously bright, and blinged out accessories without the high price tag. Below is a picture of the whole thing. :-) I haven't quite figured out what to do on the blank space to the right. I thought of writing "Rings" but I don't know...I'll update when I decide.